Skip to product information
Cabinet Vision - Lip Pull
$217.00
Lip Pull – Cabinet Vision UCS
Add bent-metal lip pulls to your doors and drawer fronts in Cabinet Vision. The machining, edge banding and the pull itself are drawn and set up for you. Pick a lip pull from your pull schedule and the UCS does the rest, giving you correct drawings, correct CNC output and correct pricing.
How it works
Assign the Lip Pull material in your pull schedule. The UCS then routes the door for the pull, draws a 3D model of the pull, fixes the edge banding and adds the pull’s pricing to the job. No manual operations, and no fiddling with the drawing afterwards.
Features
- Any size: 50, 100 and 150mm come set up, and you can add your own sizes. Each size has its own length, metal thickness, back plate, lip turn-down, overall depth, clearance and bend radius.
- Smart positioning: set to Auto, the pull goes opposite the hinges on left, right, top and bottom hinged doors. Drawer fronts go top or bottom depending on the cabinet type (base and vanity, or upper and tall).
-
Full control when you want it:
- Edge: choose which edge the pull sits on.
- Position along the edge: top, bottom or centre on a side edge; left, right or centre on a top or bottom edge.
- Offset: set the distance from the end of the edge.
-
Two machining methods:
- PRE_EDGE: the edge notch is cut on the nest with the part outline, before edging.
- POST_EDGE: the door is edged first, then the notch is cut on the part machine with two lead-in routes through the edge. These routes are sent to the part machine automatically and hidden from the 3D view.
- Back plate pocket: the plate pocket is routed into the back of the door so the pull sits flush, with adjustable depth and clearance.
- Correct edge banding: the banding stops at the pull and starts again on the other side, with corner mitres kept. Your drawings and 3D view show exactly what gets built.
- Realistic 3D pull: the lip pull is drawn as a shaped part, with separate front and back bend radii and a colour per size.
- Pricing built in: each size can carry its own material ID. Set the price in your material catalog and it comes through on every job.
- Clean hardware output: standard pull drilling is switched off automatically, while the pull stays on your hardware reports.
Requirements
- Cabinet Vision 25.2 or later
- xShaping multiplier (needed for the shaped 3D pull)
Questions or licensing: support@thecabinetmate.com