Skip to product information
Cabinet Vision - Kicks
$360.00
Kicks | Cabinet Vision UCS
Turn Cabinet Vision’s detached kicks into a proper, machine-ready kick frame. TCM – Kicks lines every sleeper up under the cabinets above, dados the sleepers into the front and back toe, notches the frame around dishwashers and adds finished skins, all from a few attributes on the kick.
What sets it apart
- Sleepers under the cabinet joins: enter the cabinet widths, or let the script set the number of cabinets from the kick length. A sleeper lands under every cabinet join, and extra sleepers are added wherever a cabinet is wider than your construction method’s maximum sleeper spacing.
- Dadoed sleepers: sleepers and ribs extend into dados in the front and back toe, with adjustable dado depth and clearance, plus a single screw at each end. Every part locates itself for fast assembly, with no measuring.
- Dishwasher cutouts: notch the back of the kick around a dishwasher or services as a Left, Right or Mid (U-shaped) cutout. Width, depth and position are all set by attribute, with up to two cutouts per kick. Returns and the cutout back are added automatically and run full height to the floor for pest control.
- Finished skins: a front skin is added to every kick. Finished ends and a finished back get side and back skins, with a choice of butt or mitre corners and edge banding on exposed ends. The frame moves in behind the skins automatically, so the overall size stays the same, and extension options carry a skin past the kick where a run needs it.
- Skin grain and sheet splits: run the skin grain horizontally or vertically with one attribute, and the skins are resized and rotated for you. Banding, mitres and scribes stay on the correct edges. Any skin longer than your max sheet length (horizontal) or max sheet width (vertical) is split into pieces, and you can move each join to suit. Joins are kept within the sheet size so every piece will cut from a board.
Also included
- Horizontal ribs on top of the sleepers (Cab position, All, or Ends only), with screw positions spaced automatically
- Shorten from bottom: lift the sleepers, or the front and back toe, off the floor for levelling
- Rail positions set to Auto, or to Specify cabinet positions when you need full control
- Materials referenced by ID and thicknesses taken from the material, so renaming in Cabinet Vision won’t break it
Compatibility
Cabinet Vision JavaScript UCS for detached kicks.